|
|
Dispraise Diversification in Business Firm
Horák, Jiří ; Moráček, Miroslav (referee) ; Kocmanová, Alena (advisor)
This master´s thesis specifies theoretical and formal procedures used while controlling and limiting risks in a company´s business activities. It covers analysis of external and internal risk factors which affect the analyzed company and analysis of the methods of limiting the mentioned risks. Consecutive suggestions and recommendations result from the performed analyses.
|
|
|
Risk Protection of a Construction in the Pre-Investment Phase
Dusilová, Kamila ; Skalický, Martin (referee) ; Puchýř, Bohumil (advisor)
The thesis points out all posiible risk that are subsequently secured in a project of family house in Velký Osek. The theoretical part summerizes the detail sof teh project and risks evident especially dutiny the pre-investigation phase of the construction project and wals of solving the possible risks. The practical part deals with the indentification on the particular project, includes listing of the risks and concludes with thein prevention.
|
|
|
Fuzzy logic methods for the risk assessment
Kovář, Kamil ; Vymazal, Tomáš (referee) ; Misák, Petr (advisor)
Master´s thesis deals about problematic of fuzzy logic, fuzzy sets and operation with them. Also thesis describing procedure of quantification risks through fuzzy sets, process of fuzzyfication, defuzzyfication a theirs application in the expert systems FMEA and FMECA. Using selected chapters of czech states standards are established critical areas in building process, it is a chapters about quality, safety and environment. With these areas by using fuzzy sets theory are created the procentual input values in the decision program, created by Matlab. Output from program is decision how big the risk rate is and if is necessarily make corrective measures. A concrete example is the production of concrete goods, describing production process and composition of fresh concrete. A practical example, created by using information from real company, is a decision about the risk rate in the qualitative area.
|
|
|
Managerial Accounting as a Tool for Construction Company Risk Management
Paštěka, Petr ; Aigel, Petr (referee) ; Vítková, Eva (advisor)
The theoretical part of this master thesis is focused on description and characteristics of the management accounting, the description of erection log book, and types of risks, which influence the company itself and possibilities for their identification, evaluation and control. I also pay attention to financial analysis area of company operating in civil engineering. The goal of the practical part of this thesis, the impacts of risk are pointed out without taking measures, the second part describes the implementation of arrangements to reduce the risk effecting the company. The measures are adjusted in the way of company´s capability to continue in the production activity. For the comparison of particular models, the parts of financial analysis - namely company´s liquidity indicators, were used.
|
|
|
Design of overvoltage protections according to CSN EN 62 305
Pochop, Zbyněk ; Paar, Martin (referee) ; Bátora, Branislav (advisor)
This Bachelor's thesis deals with the procedure in designing overvoltage protections for an ordinary house according to a new set of standards CSN EN 62305. The work consists of three main parts. The first part deals with the method of risk management according to standard CSN EN 62305-2. Besides a theoretical introduction is made a risk analysis also numerically. Result of risk analysis has implications for the way forward surge protection design for the entire building. The second part deals with the external surge protection. In the second part of the text are suggestions down lead systems and primarily air terminals. Check over is subsequently verified by the methods of the protective angle method and the rolling ball. The study also addressed the issue of TV antennae on the roof near the air-termination network. The third part of this thesis deals with internal overvoltage protection, which mainly concerns the design and location of surge arresters and lightning arrester.
|
|
| |
|
|
Planning and design electrical protection in the house wiring
Chromík, Aleš ; Mastný, Petr (referee) ; Bátora, Branislav (advisor)
The work includes familiarization with the problems of protection from injuries by electric current that includes individual protections and their use. In the work is also included effect of electric current on humans. Another point is the familiarization of protection against external and internal atmospheric surge in house wiring. Project risk analysis, against injuries to living beings by lightning strike, is calculated for the protection of atmospheric surge. The main point of this work deals with the procedure of design process of house wiring protections for given object. The project includes technical drawing, which contains how to design power and data distribution systems and switchgears, as well as the drafting of lightning system which accuracy is verified by the methods of protective angle and the ball rolling. Design and location of the right types of surge protection arresters is selected for a given objects. All project documentation is discussed in the technical report, which refers to existing standards.
|
|
|
Risk Protection of a Built Structure in the Pre-investment Phase
Jandová, Hana ; Skalický, Martin (referee) ; Puchýř, Bohumil (advisor)
The thesis points out all possible risks that are subsequently secured in a project of firming unpaved roads in cadastral unit Říčky. The theoretical part summerizes the details of the project, risks evident especially during the pre-insvestigation phase of the construction project and ways of solving the possible risks. The practical part deals with the identification of the particular project, includes listing of the risks and concludes with their prevention.
|
|
|
Reducing Risks in Company J.P. Plast, Ltd.
Holeček, Ondřej ; Henčlová, Karla (referee) ; Doskočil, Radek (advisor)
This thesis was written in company J.P Plast, Ltd. Contains all important parts to managed the risks. In the theoretical part we have done general definition of risks, risk management and etc. The first part of work includes analyzes of actual situacion at the company. In the practical part I did it actual situation by SLEPT analysis, SWOT, finance analysis and etc. According to analyzes we found risks and suggested actions to improve the competitive position of company on the market.
|
|
|
Application of the risk index matrix principles to electric power distribution system elements
Bruzl, David ; Hála, Vojtěch (referee) ; Ptáček, Michal (advisor)
The master thesis deals with the evaluation of the use of the risk index matrix (RIM) principle for distribution system elements. It evaluates the current use of RIM in EG.D, a.s., examines the individual RIM inputs and also reveals the bottlenecks. An updated method of assigning elements to the RIM is proposed that addresses the problems described and is also generally applicable to other distribution system elements at medium and low voltage levels. At the same time, a sensitivity analysis is performed to investigate the influence of different factors on the RIM and to verify the stability of the categorization of the resulting RIM. The thesis also serves as a methodology for assigning elements to the RIM and includes recommendations for the distribution system operator (DSO).
|
guest ::
